Guide to Installing A BERG Trampoline in Ireland – Inground & Above Ground
Installing a trampoline can seem like a daunting task, but with the right tools and instructions, it can be a simple and straightforward process. Berg is a popular brand of above ground and in-ground trampolines, and this guide will provide step-by-step instructions for installing both types.
Above Ground Trampoline Installation
Tools Needed:
- Measuring tape
- Level
- Wrench set
- Screwdriver
- Rubber mallet
- Scissors or utility knife
- Safety gloves
- Safety glasses
- Power drill (optional)
Step 1: Choose the Location
Choose a flat and level area to install the trampoline. Ensure there is ample space around the trampoline and no overhead obstructions such as branches or power lines.
Step 2: Assemble the Frame
Lay out all the parts and begin to assemble the frame. Refer to the instructions for the specific model of Berg trampoline being installed. Connect the frame pieces with the provided bolts and nuts using a wrench set. Use the level to ensure that the frame is level in all directions.
Step 3: Attach the Springs
Attach the springs to the frame using the provided spring tool or a screwdriver. Follow the instructions carefully to ensure the springs are properly attached and evenly spaced.
Step 4: Install the Jumping Mat
Unfold the jumping mat and attach it to the frame using the provided straps or clips. Use a rubber mallet to secure the clips in place. Make sure the mat is evenly tensioned and centered on the frame.
Step 5: Install the Safety Enclosure
Attach the safety enclosure to the frame using the provided clamps or brackets. Follow the instructions carefully to ensure the enclosure is securely attached.
Step 6: Install the Padding
Install the padding around the edges of the frame using the provided ties or clips. Use scissors or a utility knife to trim the padding to fit around any obstructions such as the enclosure poles.
Step 7: Inspect and Test
Inspect the trampoline for any loose or missing parts. Test the trampoline by bouncing on it gently and ensuring that it is stable and level.
In-Ground Trampoline Installation
Tools Needed:
- Measuring tape
- Level
- Wrench set
- Screwdriver
- Rubber mallet
- Shovel or post hole digger
- Sand or gravel
- Safety gloves
- Safety glasses
- Power drill (optional)
Step 1: Choose the Location
Choose a flat and level area to install the trampoline. Ensure there is ample space around the trampoline and no overhead obstructions such as branches or power lines.
Step 2: Dig the Hole
Using a shovel or post hole digger, dig a hole that is the same size as the trampoline frame. The hole should be at least 2 feet deep and should be slightly larger than the frame to allow for drainage.
Step 4: Assemble the Frame
Lay out all the parts and begin to assemble the frame. Refer to the instructions for the specific model of Berg trampoline being installed. Connect the frame pieces with the provided bolts and nuts using a wrench set. Use the level to ensure that the frame is level in all directions.
Step 5: Attach the Springs
Attach the springs to the frame using the provided spring tool or a screwdriver. Follow the instructions carefully to ensure the springs are properly attached and evenly spaced.
Step 6: Install the Jumping Mat
Unfold the jumping mat and attach it to the frame using the provided straps or clips. Use a rubber mallet to secure the clips in place. Make sure the mat is evenly tensioned and centered on the frame.
Step 7: Install the Safety Enclosure
Attach the safety enclosure to the frame using the provided clamps or brackets. Follow the instructions carefully to ensure the enclosure is securely attached.
Step 8: Lower the Trampoline into the Hole
Lower the trampoline into the hole, making sure it is centered and level. Use the level to ensure that the frame is level in all directions.
Step 9: Fill the Hole
Fill the space between the frame and the sides of the hole with additional sand or gravel. This will help to stabilize the trampoline and prevent shifting.
Step 10: Install the Padding
Install the padding around the edges of the frame using the provided ties or clips. Use scissors or a utility knife to trim the padding to fit around any obstructions such as the enclosure poles.
Step 11: Inspect and Test
Inspect the trampoline for any loose or missing parts. Test the trampoline by bouncing on it gently and ensuring that it is stable and level.
Additional Tips:
- Always follow the instructions provided with the specific model of Berg trampoline being installed. Instructions may vary slightly based on the specific model.
- Ensure that the trampoline is assembled and installed by at least two people to ensure safety and ease of installation.
- Wear safety gloves and glasses during installation to protect hands and eyes from injury.
- When digging the hole for an in-ground trampoline, ensure that there are no underground utilities or pipes in the area.
- Always supervise children while they are using the trampoline and ensure that they follow all safety guidelines.
- Regularly inspect the trampoline for any signs of wear or damage and replace any parts as needed.
CONCLUSION
In conclusion, installing a Berg trampoline, whether it’s an above ground or in-ground model, can be a straightforward process if you follow the instructions provided and use the right tools. Remember to prioritize safety at all times and supervise children while they are using the trampoline. With proper installation and maintenance, a Berg trampoline can provide years of fun and enjoyment for the whole family.